[REPU] Board Post Reply: Turn Signals that just stay on

From: forum@mazdarepu.com
Date: Mon Jan 20 2003 - 15:57:55 PST

A New Post has Been made to the thread [Turn Signals that just stay on]
User From: roaddancer
The Reply was:

As always, check and clean all the connectors, and make sure the grounds are good, as a bad ground on DC circuits can inject the most amusing behavior, but it is most likely a bad flasher. It should be serviceable, and cheap. Have you added or removed any lights in the circuit? May have an overload. Is everything actually coming on? A bad ground in one location may not keep it from lighting, as it may ground out through the running light circuit, but it could cause some amusing light patterns between running lights on or off.
Good luck! Old wiring is such fun!


  Log into http://http://www.mazdarepu.com/board
Go Here to Reply: http://www.mazdarepu.com/board/viewthread.php3?FID=3&TID=364
Mazda Rotary Engine Pickup List http://mazdarepu.com
To get off the list send an email to majordomo@mazdarepu.com

This archive was generated by hypermail 2.1.1 : Mon Jan 27 2003 - 00:00:20 PST