[REPU] Board Post Reply: Driveshaft -> Differential bolt size

From: Daemon user for apache (wwwrun@rotor.mazzella.org)
Date: Tue Sep 17 2002 - 14:34:45 PDT

A New Post has Been made to the thread [Driveshaft -> Differential bolt size]
The Reply was:

to determine what ratio your diff has:

jack up the rear of the car so the tires are off the ground
take off brake and put it in neutral
spin the driveshaft by hand
how many turns of the driveshaft it takes for the tires to make one full rotation is what your diff's ratio is

so if the driveshaft has to be turned 4.62 revolutions for the tires to make one revolution, u got a 4.62.

u get the idea

--- it might be easier to spin the tire than the driveshaft!


  Log into http://http://www.mazdarepu.com/board
Go Here to Reply: http://www.mazdarepu.com/board/viewthread.php3?FID=2&TID=50
Mazda Rotary Engine Pickup List http://mazdarepu.com
To get off the list send an email to majordomo@mazdarepu.com

This archive was generated by hypermail 2.1.1 : Mon Jan 27 2003 - 00:00:11 PST