[REPU] Board Post Reply: any advice for converting a repu to automatic

From: forum@mazdarepu.com
Date: Fri Sep 13 2002 - 14:44:47 PDT

A New Post has Been made to the thread [any advice for converting a repu to automatic]
The Reply was:

I am told that the Jatco 3 speeds were almost unbreakable. I'd probably try to find one in an early Rx-? and install. Be sure to check Felix Miata's website for things to watch for.

Check with some Rotary rebuilders, most people were coverting to 5speeds, and some auto's might be had real cheap. If I get around to rebuilding my Cosmo, I'd give you the tranny, but I'm still some time away from that project yet.
You could also try to mate up a GM turbo 350 or 700RL. Those are good units, and lots of parts available.


  Log into http://http://www.mazdarepu.com/board
Go Here to Reply: http://www.mazdarepu.com/board/viewthread.php3?FID=2&TID=228
Mazda Rotary Engine Pickup List http://mazdarepu.com
To get off the list send an email to majordomo@mazdarepu.com

This archive was generated by hypermail 2.1.1 : Mon Jan 27 2003 - 00:00:10 PST