[REPU] Board Post Reply: Rear Disc Brakes

From: Daemon user for apache (wwwrun@rotor.mazzella.org)
Date: Fri Aug 23 2002 - 12:12:04 PDT


A New Post has Been made to the thread [Rear Disc Brakes]
The Reply was:

[b]SE discs would be a little small, in my opinion. I'd probably go to the boneyard, and try to get a rearend from one of these SUVs or late model 6 lug PU's and either swap the whole rear end, or just use the calipers and rotors from one. Spring mount pads are available from several sources, and they are real easy to mount.

You would need an upgrade of the front brakes, for sure, to go with that. I think the easiest way to upgrade the front brakes would be with a slip on rotor, and machining the stock fron hub to fit the rotor. Once again, caliper brackets are not a big deal to fabricate, and either weld or bolt to the spindles. [/b]

-----------------------------------------------------------
DO NOT REPLY TO THIS EMAIL!!

  Log into http://http://www.mazdarepu.com/board
Go Here to Reply: http://www.mazdarepu.com/board/viewthread.php3?FID=8&TID=99
 
-----------------------------------------------------------
Mazda Rotary Engine Pickup List http://mazdarepu.com
To get off the list send an email to majordomo@mazdarepu.com
-----------------------------------------------------------



This archive was generated by hypermail 2.1.1 : Mon Jan 27 2003 - 00:00:09 PST