|
|
Thread: 1974 REPU PROSTREET-FOR SALE
|
Ape
Newbie
Posts: 5
|
posted April 01, 2007 08:53 PM |
|
1974 REPU PROSTREET-FOR SALE
I am putting my 1974 REPU up for sale so I can finish my R100.
This truck has been completelt gone through and restored. It was stripped and profesionaly refinished inside and out.
The frame has been narrowed and set up with an adjustable coil over, ladder bar ,9" ford rear with 29.5 X 11.5 X 15 Mickey Thompson ET drag slicks on Centerline wheels. It includes 31 spline axles with a spool. It has no ring and pinion The person that buys it would want to change them out anyway ( They were 6.50's)
The bed on the inside was Zolatoned and cleared. There is no rust. Also in the bed is the fuel cell, fuel pump and NOS bottle. Also the Morosso battery box.
The front suspension is stock but was rebuilt all new when the truck was done.
The cab was all repainted and has a roll cage but it is a bolt together unit. I built the truck for the street and it was for just in case.
It has Auto meter guages and a MSD 6AL box.
The hood was cut out for the blower. But I have a nice hood I will include. It is not painted to match the truck
The truck does not have a motor in it but I will be offering one with it. I dont know that much about it except it ranand had good compression. I believe it is out of a 89 RX7. I know it is fuel injected. It has the ECU and some of the wiring. I planned on puting it in the truck and making a daily driver out of it. Things change.
I can be E-mailed at Ronclemens2@msn.com
Ihave lots more pictures. Serious inquires only. Please.
|
|
klaus42
Rotorhead
Posts: 1877
|
posted April 02, 2007 10:00 AM |
|
Wow!
Ordinarily, I'm not that much of a fan of the whole 'Pro Street' straight-line drag 'deal', but... you did that really, really nice and clean. I like it! Looks to be a *very sweet* chassis. What sort of brakes are hiding behind the 5-lug swap? Transmission included/installed? Interior and underhood pics will be desired by many, no doubt. (Location and ballpark asking price might also be helpful in getting your desired response...)
|
|
SG-supra7
1st Gear
Posts: 14
|
|
posted April 08, 2007 11:38 AM |
|
I'm very interested what is your asking price on the truck???
Thanks, Cory
____________
1987, RX-7 TII, with a 7MGTE, the project is still in progress.
|
|
Ape
Newbie
Posts: 5
|
|
posted April 09, 2007 09:59 AM |
|
Hi Cory
I am asking $8500.00. This will include every thing to make it a runner, except the ring and pinion for the rear end. The truck is located in Portland OR.
|
|
|
|
